A concrete surface cleaner is a tool that attaches to the end of the pressure washer hose. It takes the place of the cleaning wand. It looks and works similar to a push mower but, it cleans concrete instead. A surface cleaner is great for cleaning driveways and sidewalks. Concrete surface cleaners come in many different sizes however, the most common size used is the 20.”
Attaching A Concrete Surface Cleaner
Before you can attach the surface cleaner, you must turn off the pressure washer. If the pressure washing wand is connected, you will need to release the pressure and disconnect the wand. After the wand is removed from the hose, attach the hose to the surface cleaner. Now your ready to start cleaning with your concrete surface cleaner.
How to use a concrete surface cleaner
With the pressure washer on, walk forward or backwards while pressing the trigger at the handle of the surface cleaner. When the trigger is engaged it allows water to flow down to the bottom of the housing. This force of water will cause the spray bar underneath the housing to rotate. The water going through the spray bar cleans the concrete as you walk. Aspen Power Washing cleans large amounts of residential and commercial concrete in Macon, Ga. Our concrete cleaning equipment consists of two 20” surface cleaners, three 4,000 psi pressure washers and 600 gal of on board water. We have the tools needed to get the job done, big or small.